A 24 in vanity with sink can work well in a small room, but only if the faucet, basin and pipes line up. For the size story behind this page, read the 24 inch bathroom vanity guide. Also, you may see the spelling 24in bathroom vanity with sink in search results, and it means the same 24 in size.
The short answer
Pick a faucet that matches a 4 in centerset pattern, because all four products in this category use that pattern. Next, check the faucet hole size and the drain size before you buy a tap. Still, do not assume the top and sink come in the box, because that fact is not confirmed for any of the four products here. So check the product page for each model you like.
What "with sink" means for a 24 in cabinet
A vanity sink basin sits in or under the vanity top, and it sets where you stand, wash and reach. The bathroom vanity cabinet below it holds the pipes and your daily items. However, "with sink" does not tell you if the sink, top and faucet come together, so read the product page line by line before you order.
Faucet holes: 4 in centerset for all four
A centerset faucet has one spout and two handles on a single plate, and the outer holes sit 4 in apart. All four products in this category use this pattern, so do not shop for a wide-spread tap for these models. Here's why that count matters: if the top has a different hole count, your tap will not fit without a new top.
Faucet hole and drain sizes by product
| Product | Faucet pattern | Faucet hole dia. | Drain dia. |
|---|---|---|---|
| Korra 24 | 3 holes, 4 in centerset | check the product page | 1 3/4 in |
| Huckleberry 24 | 3 holes, 4 in centerset | 1 3/16 in | 1 3/4 in |
| Beaufort 24 | 3 holes, 4 in centerset | 1 3/16 in | 1 3/4 in |
| 22 in deep model | 3 holes, 4 in centerset | check the product page | 1 3/4 in |
But the faucet hole dia. is confirmed only for Huckleberry 24 and Beaufort 24, at 1 3/16 in each. For Korra 24 and the 22 in deep model, check the product page before you buy a tap.
How far the faucet line sits from the basin front
Faucet line to basin front tells you how far your hands reach from the tap to the front edge of the basin. So compare the numbers below before you pick a model.
Korra 24: 7 in (177 mm).
Huckleberry 24: 9 3/16 in (234 mm).
Beaufort 24: check the product page. Its faucet line number is not confirmed, so do not use another model's number for it.
22 in deep model : 8 1/4 in (209 mm).
Korra 24 also gives two more confirmed numbers. Its basin centre sits 12 in (305 mm) from each side, so the basin sits in the middle of the 24 in width. Its setback, from the faucet line to the back edge, is 1 1/2 in (39 mm). That said, these two numbers are confirmed for Korra 24 only. Do not apply them to the other three models.
Sink cutout width: only one size is confirmed
A sink cutout is the hole cut in the vanity top for the basin. If the cutout is wrong, the basin will not sit right. So this number matters a lot, and it is confirmed for only one product here.
The 22 in deep model has a confirmed sink cutout width of 17 7/16 in. For Korra 24, Huckleberry 24 and Beaufort 24, the cutout width is not confirmed, so check the product page for each one. Do not guess from the 22 in deep model, because its top depth is different from the other three. Also, do not guess from the 24 in width alone, because the cutout sits inside the top with room left on each side.
Top and sink included: not confirmed for any of the four
Top included, sink included and finishes are not confirmed for any of the four products in this category, unless the product page says otherwise. That means you must check the product page for each model before you plan your budget. Also, do not assume a top from one model comes with another model, because the depths differ. The three 19 in deep models share a depth, but the 22 in deep model needs its own top size.
You can see all four models on the 24 inch bathroom vanity collection page. Open each product page and look for the top and sink lines first.
Top types in general terms
A quartz top is a hard, man-made stone top. A cultured marble top is a cast top with a smooth finish, and it often comes with the basin built into the top. However, neither top type is confirmed for any named product here, so do not read these lines as a claim about Korra 24, Huckleberry 24, Beaufort 24 or the 22 in deep model. Instead, use them to learn the terms, then check the product page for the top that each model actually uses.
For a powder room, I'd pick the 19 in deep option before the 22 in one, because it leaves more floor space in front of the cabinet.
Undermount sinks, drains and supply lines
An undermount sink hangs below the vanity top, so the top edge stays clear for wiping water back into the basin. The vanity sink basin still needs a drain assembly below it, and that assembly links to the waste pipe. Also, the supply lines bring hot and cold water to the tap, so they must reach the tap tails with room to spare.
How depth changes the sink space
Depth in this category is 19 in for three products and 22 in for the 22 in deep model. Say it plainly: the deeper cabinet pushes the basin and the front edge 3 in closer to you. So measure the floor in front of the cabinet, not just the wall behind it. For the full fit steps, read our guide to 24 inch vanity dimensions and clearance. And for room layout ideas, see our page on a 24 inch vanity for a powder room.
A 24 inch vanity and sink pairing works best when the depth fits the room. A 19 in deep model leaves more floor space in front, while the 22 in deep model gives a deeper top. Because of that, depth is a fit choice first and a style choice second.
Honest limitation
A 24 in vanity gives you one basin and a small top, so counter space stays tight. If you share the sink with another person at the same time, you will run out of room fast. Also, large bottles and spare towels may need another spot in the room. Still, for one person at a time, the size can work well.
When not to buy
Do not buy a 24 in vanity with sink if two people need to use the basin at the same time each morning. Do not buy it if your room has a very wide wall and you want a long counter, because this size will leave unused wall on each side. Also, do not buy the 22 in deep model if the floor in front of the cabinet is already tight, because its extra depth will shrink the walkway more. Instead, pick the 19 in deep option, or pick a wider size if the wall allows it. And check the product page for top, sink and cutout before you buy any of the four.
Related guides
24 inch vanity dimensions and clearance
24 inch vanity for a powder room
FAQ
What faucet fits a 24 in vanity with sink?
All four products use a 4 in centerset faucet with three holes, so buy a tap that matches that pattern. The hole dia. is 1 3/16 in for Huckleberry 24 and Beaufort 24, but not confirmed for Korra 24 or the 22 in deep model, so check the product page first.
Does the top and sink come included with these models?
That fact is not confirmed for any of the four products, so do not assume it. The product page for each model is the only safe source for top, sink and finish details, and a top that fits a 19 in deep model will not fit the 22 in deep model.
What is the sink cutout width for a 24 in vanity?
Only the 22 in deep model has a confirmed sink cutout width, at 17 7/16 in. For Korra 24, Huckleberry 24 and Beaufort 24, the cutout width is not confirmed, so do not guess from another model. Check the product page or ask the seller for the drawing first.
How far is the faucet line from the basin front?
Korra 24 measures 7 in (177 mm) from the faucet line to the basin front. Huckleberry 24 measures 9 3/16 in (234 mm), and the 22 in deep model measures 8 1/4 in (209 mm). Beaufort 24 has no confirmed number here, so check the product page.
Should you pick a 19 in deep or a 22 in deep model?
Pick a 19 in deep model if floor space in front of the cabinet is tight, because it leaves 3 in more room than the 22 in deep model. Pick the 22 in deep model only if the walkway still feels clear after you mark its front edge on the floor, and check the door swing first.
