The faucet does not come in the box with these vanities, so the drilling in the top decides which faucet you can buy. This guide covers bathroom vanities single sink at Veil and the three faucet patterns their tops are drilled for. It also covers the drain honestly, because not one product page in this store states a drain size or a faucet hole diameter. So you will learn what the pages state, what they leave out, and what to confirm before ordering parts. Every model named here sits in the single sink vanity collection at Veil.
The Three Faucet Patterns on Bathroom Vanities Single Sink
A faucet pattern is the set of holes the top is drilled for, and your faucet has to match it. Because a one sink vanity carries a single basin, each top needs just one set of holes. Three patterns appear across the range.
Some tops are drilled for a single hole, so one faucet mounts through that one hole. Five models use this pattern at every single-sink size: MarbleLux, DeerValley, Carla, Avignon and Abruzzo. Other tops take a 4 in centerset faucet instead, where the spout and both handles sit on one base and the holes sit 4 in apart. Six models use it at every single-sink size: Bannon, Stella, Lyton, Larissa, Glacier Bay and Burgess. The third pattern is 8 in widespread, with the spout and handles as three separate pieces and the outer holes 8 in apart. Sonoma, Wilsham, Danby, Windlowe and Cambridge use that pattern at every single-sink size, and Fremont joins them at its 32 in size. But Fremont's 49 in size states no pattern at all.
When the Pattern Changes with Size
Eight models in this range do not keep one pattern across their sizes, so the size you pick can change the faucet you need. Seven of them start with a 4 in centerset drilling at the smaller widths and switch to 8 in widespread as the vanity gets wider. Sedgewood and Clady make that switch at 37 in, while Beaufort makes it at 42 in. Gabi switches at 36 in and up, and Doveton switches at 36 in too. Korra and Huckleberry follow the same shape, but their pages write the small-size drilling as "4 in" before the switch to 8 in widespread at 36 in. Aberdeen runs the other way, because it is drilled 8 in widespread at most sizes but drops to a 4 in centerset on its 32 in corner size.
A few sizes state no pattern, though. Gabi leaves its 30 in size unstated, and Doveton leaves its 18 in size unstated. Two whole models, Hepburn and Luxeyard, state no faucet pattern on their pages at all. So check the product page for those models and sizes before you plan around a faucet.
The Drain: the Size No Page States
Here is the honest gap in this data. Not one page for bathroom vanities single sink at Veil states a drain size, and none of them states a faucet hole diameter either. So you cannot pick a drain assembly from the listing alone, because the one number you need is missing. The drain also rarely sits in the box: only the Stella page says plainly that its drain is not included, and most other pages say nothing about a drain either way. But many pages do state whether the sink has an overflow, and that detail matters, because a drain built for a sink with an overflow is not the same part as one built for a sink without one. So read the sink line for your size first, then confirm the drain size on the product page or with the seller before you order.
When Not to Buy the Faucet Yet
If the drilling line for your exact size is missing, hold off on the faucet. A bathroom vanities single sink top only takes the faucet its holes were drilled for, so a near match still will not mount. That risk is real on the Hepburn and the Luxeyard, which state no pattern at all, and on single sizes like the Fremont 49 in, the Gabi 30 in and the Doveton 18 in. Instead, confirm the pattern first, on the product page or with the seller. Then order once you know, because sending back a faucet that cannot fit costs you time.
Related guides
Questions
No product page in this store states a drain size, so this guide cannot give you a number. Instead, check two things before you order a drain. First, read whether your sink has an overflow, because the pages do state that and the drain has to suit it. Then confirm the drain size on the product page or with the seller.
No. On every model whose page covers the point, the listing states that the faucet is not included, so you buy it on its own. A few pages, like the Hepburn and the Luxeyard, do not state it either way and give no drilling line either. So check the product page for your model before you assume anything about the box.
Better not, because a faucet only mounts if it matches the holes in the top, and a guess can leave you with a part that cannot fit. Some sizes leave the pattern unstated, like the Fremont 49 in, the Gabi 30 in and the Doveton 18 in. So confirm the pattern on the product page or with the seller first, and order after that.
