A double vanity puts two basins on one cabinet, so two people can brush, wash and get ready side by side. It suits a shared main bathroom, because the morning clash is usually about the basin, not about storage. But two basins ask for a long wall, and they change how the counter works. At Veil, the choice is small and easy to check: three models, with tops from 61 to 84 in wide. Start with the double sink bathroom vanity collection, and then use this guide to decide if two sinks earn that wall in your room.
When a Double Vanity Earns Its Wall
Two sinks pay off when two people share one bathroom at the same time. If your mornings overlap, each person gets a basin and a mirror spot, so the queue at the sink goes away. Nobody waits to brush their teeth, and nobody leans over a wet counter that someone else just used.
Width is the first test, because every double vanity at Veil is wide. The Maranon is 60 in wide, and the Cambridge tops run 61, 67 and 73 in wide. The Stafford goes further still, at 84 in wide. So measure the finished wall first, because a double this size needs its full clear width. If the wall falls short, a wide single sink is the honest fallback instead.
Storage splits too, and that helps the case for two sinks. The Cambridge gives you six drawers and four doors, so each person can claim a side. The Stafford gives you five drawers and four doors across its 84 in run. The Maranon floats instead, with a cabinet and drawers under its trough top, so the floor stays clear below it.
Depth matters as well. The Cambridge and the Stafford are both 22 in deep, so they need a walkway that matches. The Maranon is only 19 in deep, because it hangs on the wall. So a tighter room may take the floating double more easily than the floor-standing ones, even at the same width.
Single Sink or Double Sink, Side by Side
A single sink keeps things simple, but a double changes the daily routine. This table compares the two layouts on the points that decide the fit.
| Check | Single sink | Double sink |
|---|---|---|
| Counter space | One basin, so the counter stays open on both sides | Two basins share the top, so the stretch between them is shared |
| Wall needed | Widths run from 18.5 in up, and most sit between 24 and 48 in | Tops run from 61 to 84 in at Veil, so the wall has to be long |
| Plumbing | One basin and one drain line | Two basins and two drain lines |
Height plays a part too. The Cambridge and the Stafford stand 36 in high, so the basin rim sits at a fixed height. The Maranon hangs on the wall instead, and its cabinet is 19.25 in high overall, so you set the mounting height when you fit it. Also, think about who uses the room: one basin serves one person at a time, so a guest bath rarely needs two.
What You Give Up With Two Sinks
Two basins take space that a single sink leaves open. The counter between the basins becomes the shared stretch, so bottles and brushes compete for the middle instead of spreading out to both sides. You also give up wall length, because a top of 61 to 84 in rules out short walls and tight corners.
The shopping list grows too. Each basin needs its own faucet, and the faucets are not included on these models, so you buy two. The drilling differs by model, though: the Cambridge and the Stafford take an 8 in widespread faucet at each sink, while the Maranon top has one hole per basin for a single-lever faucet. Two basins also mean two drains to connect, so the plumbing job is bigger than a single sink job.
The measure needs care as well. On the Cambridge, the stone top runs an inch wider than the cabinet, so the 60 in cabinet needs 61 clear inches of wall. The Stafford cabinet needs its full 84 in. So check the door swing and the path into the room before you order, because a wide cabinet has to get through the door first.
When a Single Vanity Is the Better Choice
A single vanity is the better pick when the wall is short or the room serves one person. Singles at Veil start at 18.5 in wide, and most sit between 24 and 48 in, so they fit powder rooms and guest baths that a double cannot enter. Even the widest single, the Carla at 59 in, keeps one basin and leaves the counter open on both sides.
Timing decides it too. If you and your partner get ready at different hours, one basin is not a compromise at all. In that case, a single will serve you better than a bathroom vanity with double sink that eats the whole wall. Browse the single sink vanity collection to see those widths.
If Your Wall Is Closer to 48 Inches
Every double vanity in this guide starts at 60 in wide, because the three models here are the wide ones. So if your wall measures around 48 in, these models will not fit, and forcing the measure helps nobody. Instead, read the 48 inch double sink guide, which covers the double-sink choices at that width. Come back to this guide only if your wall can take 60 in or more.
Related guides
Questions
The Maranon is the narrowest double here, at 60 in wide and 19 in deep. It floats on the wall, and its top is one solid surface piece with two basins and the drain included. The Cambridge starts just above it, because its smallest top is 61 in wide on a 60 in cabinet.
No. On all three models, the page states that faucets are not included, so you buy two faucets of your own. The Cambridge and the Stafford are drilled for an 8 in widespread faucet at each sink. The Maranon has one hole per basin instead, drilled for a single-lever faucet.
Plan for the full top width, not just the cabinet. The Cambridge tops need 61, 67 or 73 clear inches, because each top runs an inch wider than its cabinet. The Maranon needs 60 clear inches, and the Stafford needs 84. So measure the finished wall before you fall for a model.
