/
/
Korra 24 Inch Bathroom Vanity

Korra 24 Inch Bathroom Vanity

$499.00

A shaker-door vanity in moisture-resistant MDF with an 18mm engineered stone top, 3 inch backsplash and two hardware sets. Minor assembly is required. One-year limited warranty.

Korra 24 Inch Bathroom Vanity

This Korra 24 in. W x 20.08 in. D vanity is a shaker-door cabinet with a grown-up specification for its size: an 18mm engineered stone top with a 3 inch backsplash, a configurable interior shelf behind two soft-closing doors, a U-shaped top panel that works around the plumbing, and two hardware sets in the box.

Design and Construction

The cabinet is moisture-resistant MDF construction – the practical board for a steamy room – with a white veneer finish outside and a weathered tan finish inside, a Korra signature you see every time the doors open. The shaker doors hang on concealed 6-way hinges with a soft-closing action, adjustable after installation; the shelf inside reconfigures to your bottles; and adjustable leveling feet settle the cabinet on uneven floors. One honest note, because the Korra listings bury it: minor assembly is required – allow the time, or hand it to your installer with the plumbing.

Countertop and Finish

The top is white engineered stone in a Bombay finish – scratch- and stain-resistant – with an 18 inch rectangular undermount sink with an overflow drain and a 3 inch matching backsplash. It is pre-drilled for a 4 inch faucet. Two finishes: Simply White (matte black hardware fitted, with an extra brushed gold set included) and Vintage Blue (brushed gold and brushed nickel sets). The faucet and mirror are sold separately.

What You Get

The cabinet, engineered stone top and matching backsplash, and both hardware sets. Minor assembly is required; your installer applies sealant between the countertop and cabinet as directed during installation. Covered by a 1-year limited warranty.

Specifications

  • Dimensions: 24 W x 20.08 D x 34.49 H inches
  • Storage: 2 soft-closing doors, 1 configurable interior shelf, U-shaped top panel
  • Top: white engineered stone (18mm), 3 in matching backsplash included, 1 rectangular undermount sink with overflow
  • Faucet drilling: 4 in (faucet not included)
  • Hardware: two sets included – the mix depends on the finish (see above)
  • Installation: freestanding, minor assembly required, adjustable leveling feet

Before you order:

  • Measure the finished wall: this cabinet needs 24 clear inches.
  • Mark the 20.08-inch depth on the floor and check the door swing against it.
  • Check your drain and supply lines against the sink position before it arrives.

Korra 30 Inch Bathroom Vanity

This Korra 30 in. W x 22.05 in. D vanity brings the range’s full kit to the standard single-bathroom size: shaker doors with soft-closing hinges, a configurable shelf and U-shaped top panel inside, an 18mm engineered stone top, and two hardware sets so the metal is your choice, not the factory’s.

Design and Construction

Moisture-resistant MDF construction, white veneer outside and weathered tan inside. The U-shaped top panel is the Korra’s quiet trick – storage surface that wraps the plumbing instead of surrendering the top of the cabinet to it. Doors close softly on concealed, 6-way adjustable hinges; the shelf reconfigures; leveling feet adjust. One honest note, because the Korra listings bury it: minor assembly is required – allow the time, or hand it to your installer with the plumbing.

Countertop and Finish

The engineered stone top – Bombay finish, scratch- and stain-resistant – carries a 20 inch rectangular undermount sink with an overflow drain and a 3 inch matching backsplash. It is pre-drilled for a 4 inch faucet. Two finishes: Simply White (matte black hardware fitted, with an extra brushed gold set included) and Vintage Blue (brushed gold and brushed nickel sets). The faucet and mirror are sold separately.

What You Get

The cabinet, engineered stone top and matching backsplash, and both hardware sets. Minor assembly is required; your installer applies sealant between the countertop and cabinet as directed during installation. Covered by a 1-year limited warranty.

Specifications

  • Dimensions: 30 W x 22.05 D x 34.49 H inches
  • Storage: 2 soft-closing doors, 1 configurable interior shelf, U-shaped top panel
  • Top: white engineered stone (18mm), 3 in matching backsplash included, 1 rectangular undermount sink with overflow
  • Faucet drilling: 4 in (faucet not included)
  • Hardware: two sets included – the mix depends on the finish (see above)
  • Installation: freestanding, minor assembly required, adjustable leveling feet

Before you order:

  • Measure the finished wall: this cabinet needs 30 clear inches.
  • Mark the 22.05-inch depth on the floor and check the door swing against it.
  • Check your drain and supply lines against the sink position before it arrives.

Korra 36 Inch Bathroom Vanity

This Korra 36 in. W x 22.05 in. D vanity steps the faucet drilling up to 8 inch widespread and gives the shaker-door layout a family-bathroom width: two soft-closing doors, a configurable shelf and the U-shaped top panel, under an 18mm engineered stone top with a 3 inch backsplash.

Design and Construction

The construction story is the same considered kit as the rest of the range: moisture-resistant MDF, white veneer outside, weathered tan inside, concealed 6-way hinges that adjust after the cabinet is set, soft-closing doors, and a shelf that reconfigures around what you store. The U-shaped panel keeps the top of the cabinet usable around the plumbing. Adjustable leveling feet handle the floor. One honest note, because the Korra listings bury it: minor assembly is required – allow the time, or hand it to your installer with the plumbing.

Countertop and Finish

White engineered stone in a scratch- and stain-resistant Bombay finish, a 20 inch rectangular undermount sink with an overflow drain, and a 3 inch matching backsplash. Pre-drilled for an 8 inch widespread faucet. Two finishes: Simply White (matte black hardware fitted, with an extra brushed gold set included) and Vintage Blue (brushed gold and brushed nickel sets). The faucet and mirror are sold separately.

What You Get

The cabinet, engineered stone top and matching backsplash, and both hardware sets. Minor assembly is required; your installer applies sealant between the countertop and cabinet as directed during installation. Covered by a 1-year limited warranty.

Specifications

  • Dimensions: 36 W x 22.05 D x 34.49 H inches
  • Storage: 2 soft-closing doors, 1 configurable interior shelf, U-shaped top panel
  • Top: white engineered stone (18mm), 3 in matching backsplash included, 1 rectangular undermount sink with overflow
  • Faucet drilling: 8 in widespread (faucet not included)
  • Hardware: two sets included – the mix depends on the finish (see above)
  • Installation: freestanding, minor assembly required, adjustable leveling feet

Before you order:

  • Measure the finished wall: this cabinet needs 36 clear inches.
  • Mark the 22.05-inch depth on the floor and check the door swing against it.
  • Check your drain and supply lines against the sink position before it arrives.

Korra 42 Inch Bathroom Vanity

This Korra 42 in. W x 19 in. D vanity is where the range adds drawers: three regular drawers join the two soft-closing doors and adjustable shelf, in a shallower 19 inch depth that suits bathrooms where a full-depth cabinet crowds the door swing. One sink, three drawers, and an engineered stone top.

Design and Construction

Drawers change a vanity’s daily life – the three here take the small things that cabinet shelves swallow. The doors close softly on concealed 6-way adjustable hinges; the shelf inside adjusts; the construction is moisture-resistant MDF with the Korra’s weathered tan interior. Adjustable leveling feet settle it. One honest note, because the Korra listings bury it: minor assembly is required – allow the time, or hand it to your installer with the plumbing.

Countertop and Finish

The top is 18mm white engineered stone in a scratch- and stain-resistant Bombay finish, with a 20 inch rectangular undermount sink with an overflow drain and a 3 inch matching backsplash. It is pre-drilled for an 8 inch widespread faucet. Two finishes: Simply White (matte black hardware fitted, with an extra brushed gold set included) and Vintage Blue (brushed gold and brushed nickel sets). The faucet and mirror are sold separately.

What You Get

The cabinet, engineered stone top and matching backsplash, and both hardware sets. Minor assembly is required; your installer applies sealant between the countertop and cabinet as directed during installation. Covered by a 1-year limited warranty.

Specifications

  • Dimensions: 42 W x 19 D x 34.5 H inches
  • Storage: 2 soft-closing doors, 1 adjustable interior shelf, 3 drawers
  • Top: white engineered stone (18mm), 3 in matching backsplash included, 1 rectangular undermount sink with overflow
  • Faucet drilling: 8 in widespread (faucet not included)
  • Hardware: two sets included – the mix depends on the finish (see above)
  • Installation: freestanding, minor assembly required, adjustable leveling feet

Before you order:

  • Measure the finished wall: this cabinet needs 42 clear inches.
  • Mark the 19-inch depth on the floor and check the door swing against it.
  • Check your drain and supply lines against the sink position before it arrives.

Korra 60 Inch Double Sink Bathroom Vanity

This Korra 60 in. W x 22.05 in. D vanity is the double-sink head of the range: four doors, three drawers and two adjustable shelves under two sinks in an 18mm engineered stone top. It is the two-person version of the Korra kit – shaker fronts, soft-closing doors, and hardware sets for both basins.

Design and Construction

The front divides sensibly: doors for the bulky shared storage, three drawers for the personal small things, shelves that adjust inside. Moisture-resistant MDF construction, white veneer outside and weathered tan inside, concealed 6-way hinges on soft-closing doors, adjustable leveling feet under five feet of cabinet. One honest note, because the Korra listings bury it: minor assembly is required – allow the time, or hand it to your installer with the plumbing.

Countertop and Finish

White engineered stone, Bombay finish, scratch- and stain-resistant, carrying two 20 inch rectangular undermount sinks with overflow drains and a 3 inch matching backsplash. Each sink is pre-drilled for an 8 inch widespread faucet. Two finishes: Simply White (matte black hardware fitted, with an extra brushed gold set included) and Vintage Blue (brushed gold and brushed nickel sets). The faucets and mirrors are sold separately.

What You Get

The cabinet, engineered stone top and matching backsplash, and both hardware sets. Minor assembly is required; your installer applies sealant between the countertop and cabinet as directed during installation. Covered by a 1-year limited warranty.

Specifications

  • Dimensions: 60 W x 22.05 D x 34.49 H inches
  • Storage: 4 soft-closing doors, 2 adjustable interior shelves, 3 drawers
  • Top: white engineered stone (18mm), 3 in matching backsplash included, 2 rectangular undermount sinks with overflow
  • Faucet drilling: 8 in widespread at each sink (faucet not included)
  • Hardware: two sets included – the mix depends on the finish (see above)
  • Installation: freestanding, minor assembly required, adjustable leveling feet

Before you order:

  • Measure the finished wall: this cabinet needs 60 clear inches.
  • Mark the 22.05-inch depth on the floor and check the door swing against it.
  • Check your drain and supply lines against the sink position before it arrives.

Shopping the range: browse all 24 inch bathroom vanities in this size, or compare white bathroom vanities in this finish family.

Size

24 inch, 30 inch, 36 inch, 42 inch, 60 inch

Finish

Simply White, Vintage Blue

Reviews

There are no reviews yet.

Be the first to review “Korra 24 Inch Bathroom Vanity”

Your email address will not be published. Required fields are marked *

Related Products

Shopping Cart0

No products in the cart.